home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Libris Britannia 4
/
science library(b).zip
/
science library(b)
/
ELECTRON
/
PCB_DESI
/
H027.ZIP
/
MANUEL.EXE
/
lha
/
README.TXT
< prev
next >
Wrap
Text File
|
1991-10-02
|
4KB
|
99 lines
TO LOAD LAYO
Type INSTALL C: D: or E:
┌─════════════════════════════════════════════════════════════════════════╗
│ Memory on harddisk necessary : 4 Mb free ***║
│ don't install if you do not have that space free ║
│ Available RAM minimum : 550 Kb RAM ***║
│ To check available memory Type in DOS :CHKDSK (last line) ║
╘═════════════════════════════════════════════════════════════════════════╝
IF MSDOS 5.01 is used or DRDOS 6.00 you may obtain 610 Kb RAM
In that case the LEE router will be 20 times faster.
Once in the Layo1 editor:
┌─────────────────────────────────────────────────────────────────────────┐
│ Recent updates are in the "F1" HELPSCREENS │
│ available ON the menu-lines, that is │
│ BEFORE YOU TYPE ENTER ON THE LINE. │
│ These infos REPLACE some texts in C:\LAYODOC\MANUEL. │
└─────────────────────────────────────────────────────────────────────────┘
The command "LAYO1" to run LAYO1 is now LAYO1E,
LAYO1E /c (open template)
Open the popmenu: ESC and F1 on the lines.
Load existing circuit LAYO1E CNF\nnnn.CNF ( nnnn = any name
you'll find in \CNF\ )
Load new circuit LAYO1E CNF\nnnn.CNF (nnnn = any name
you want)
LOADING WITH "CNF\nnnn" ONLY if you intend to create/use component-list CMP,
netlist NET and eventually autorouting.
if not and you
want to work manually: just t for draw, s for pads and F3 to load components
on an empty screen immediately after loading with
LAYO1E.
Place corners and save as a simple module LMC with F4.
In this simple mode "Edit Netlist" will not work.
After loading on your harddiskPLEASE PRINT ALL FILES IN C:\LAYO1EE\LAYODOC
┌──────────────────────────────────────────────────────────────────────────┐
│ Important note concerning \LIB\*.LIB, these files are added for your │
│ convenience. But you MUST create always your own LIB. Place your LIB │
│ on top in in the template in MENU » UTILISATEUR » LIBRAIRIES. │
│ While creating you may copy blocks from the exemple libraries to avoid │
│ bunches of typing work but check every character. │
│ (You may try however the existing LIBs but you risk "Not found") │
│ │
│ In the graphic mode after loading a CNF (Dos command or Popmenu: New │
│ design, it is possible to create a *.CMP with F3. However in MANUAL │
│ MODE in LIB-files, F3 can only read the first 1000 componentnames. │
│ │
│ If you prepare a xxx.CMP (component-list) and place it in \CNFnn\ │
│ Layo will place all components automatically on screen after the Dos │
│ command: LAYO1E CNFnn\xxx.CNF │
│ In that case the correct LIB must be available and the name typed in │
│ Menu » User » Libraris. │
╘────── ───────────────────────────────────────────────────────────────────┘
In TRACEURS.EXE, -means PLOTTERS in french-, type immediately F5 to display the
nice exemple which is already on the first line: C:\LAYO1EE\CNF\DEMO_SMD
If you use another harddisk change C: in D: etc., next F5.
GERBER OUTPUT: The file C:\LAYO1EE\GERBER.DAT (input) CAN BE MODIFIED
BUT ONLY THE COLUMN "mills". °
THE GERBER CONFIGURATION IN 'TRACEURS.EXE' WILL USE YOUR CHANGEMENTS.
Again: Use F1 regulary on the pop-menu-lines before typing Enter.
KILLDIR
Syntax:
KILLDIR LAYO1EE TO DELETE THE COMPLETE TREE-STRUCTURE.
COPYRIGHT LAYO1 Peter Baas 1984,1985, 1986, 1987, 1988, 1989, 1989, 1990, 1991